8.3 Sewing with an external PicoTop control panel
Sewing without a sewing program (manual sewing)
Precondition: Key 11 (P/M) is unlit
Shown on the display (Fig.8.8)
target stitches for front backtack target stitches for end backtack
The target stitch numbers for the front and end backtacks can only be set when the machine is at standstill:
for front backtack with key A+ or B+ or
key A - or B-,
for end backtack with key C+ or D+ or
key C - or D-.
Shown on the display during sewing (Fig. 8.9)
- after starting if parameter <605> = 1 actual speed
Fig. 8.8
Fig. 8.9
p4xpd-2-en 8.4 08-08-2
9
To Next Page
Loading...