Table of Contents Part 2
Chp. Contents Page
7. Description of the PicoDrive drive system 7.1 - 7.8
7.1 Motor QE3760/QE5540
7.2Control unit P4
xPD
7.3 Speed control unit SCU2
7.4 External PicoTop control panel
7.5 Using the drive
8.Application8.1 - 8.18
8.1 Displays on the PicoTop control panel
8.2 Sewing programs
8.3 Sewing with an external PicoTop control panel
8.4 Sewing with a sewing program based on a program example
8.5 Special darning program
8.6 Error messages (troubleshooting)
9. Parameter programming 9.1 - 9.10
9.1 Programming level "a" (operator level)
9.2Programming level "b" (mechanic level)
9.3 Programming level "c" (special level)
9.4 Resetting
9.5Start inhibitor device (Error 9)
9.6 Treadle (speed control unit)
10. Start of operation 10.1 - 10.8
10.1 Checking the direction of rotation and reference position of the needle bar
(needle position NP0)
10.2 Teach process for the gear ratio
10.3 Checking needle positions NP1/NP2
10.4 Checking the maximum speed
10.5 Sewing head synchronisation
10.6 Hardware test
p4
xpd-2-en 08-08-29
Technical modifications reserved!
To Next Page
Loading...
Need help?
General
