p4xpd-2-en 7.8 08-08-29
7.5 Using the drive
The PicoDrive drive system can be used for various manufacturers.
Each machine class requires a specific control unit program.
Activation (switching on) of the machine-specific control unit program is
via parameter <799> (see Chp. 9 Parameter programming).
The following applies:
For the P45PD drive system
Parameter <799> to 1 = machine class 1
for: 1 = PFAFF machine class 1163
2 = PFAFF machine class 1180
3 = PFAFF machine class 1122
4 = PFAFF machine class 591
5 = PFAFF machine class 1525S
6 = PFAFF machine class 574
To Next Page
Loading...