Pfaff Powerline 2545 - Blade Position

Adjusting
38
Fig. 1 - 30
● Set stitch length to "0"
● Move lever 1 to its stop to the front
● Move support 2 (screw 3) acocording to the setting
1.07.06 Blade position
Rule
If the knife is max. to the front and thestitch-length setting "0" the edge 5 of the knife 4
should be 0.2 mm a way from the feed dog 6
0,2 mm
1
2
3
4
4
5
6