Pfaff Powerline 2545 Adjustment Manual

Adjusting
44
1.07.12 Parameter values
The following parameters has to be set diffrent to the regulare
P74 ED instruction manual.
Group Parameter Description User level Setting range Set value
3
309 Position short trimmer on B, C 0 - 255 180
310 Functions A16
0 = no function
1 = midle guide
2 = short trimmer
B, C 0 - 2 2
312 Selection of midle guide B, C ON - OFF OFF
314 Funkctions A7
0 = no function
1 = edge trimmer
2 = thread-pulling sewing start
B, C 0 - 2
0
315 Funkctions A15
0 = no function
1 = Faclean thread-monitor
2 = Thread-pulling at sewing-start
B, C 0 - 2
0
316 Position to pull thread at seam-start B, C 0 - 255 235
317 Time to pull the thread at sewing-start B, C 10 - 1000 100
6
657 Stitch protection / knotting B, C ON - OFF ON
7
702 1 Needle position (down) B, C 0 - 255 20
703 Thread lever position up B, C 0 - 255 235
705 End trim signal1 B, C 0 - 255 210
706 Start trim signal B, C 0 - 255 100
707 Start thread tension release B, C 0 - 255 190
9 989
Thread-nipper at sewing-start
0 = Thread-nipper off
1 = Thread-nipper without foot-lift
2 = Thread-nipper with foot-lift
B, C 0 - 2
1

Pfaff Powerline 2545 Specifications

General

Brand	Pfaff
Model	Powerline 2545
Category	Sewing Machine
Language	English