Name: PhaseOne XF IQ4
Brand: PhaseOne
Rating: 4 (1 reviews)

To Next Page

To Previous Page

Updating the XF IQ4 System Firmware

How to update the XF IQ4 Camera System Firmware

To install a Feature Update, simply download it from the Phase One website

and copy the camera package ﬁle (with the ﬁle extension .fwp) to the root

folder of a XQD card.

1. Place the IQ4 on the XF Camera Body.

2. Make sure your installed batteries are fully charged on both the XF

Camera Body and IQ4.

3. Insert the XQD card into the IQ4.

4. On IQ4 select Menu > System Settings > Update Firmware.

5. The XF IQ4 Camera System will now update with all relevant ﬁrmware

updates.

Please do not interrupt the updating process. Should this happen by mistake,

the update will fail and you will have to run the update again.

Note that the ﬁrmware update process runs an assessment of what ﬁrmware

ﬁles are needed for both the XF Camera and the IQ4. After this assessment is

completed, the ﬁrmware will be updated on all units with relevant

corresponding ﬁrmware.

If you disconnect the IQ4 from the XF Camera Body, the ﬁrmware will only be

updated on the back. This might result in some features not working correctly

on the XF Camera with an older ﬁrmware and it will be necessary to repeat the

ﬁrmware update with the IQ4 attached to the XF Camera to enable all

features.

Updating Firmware from the IQ4

125System Maintenance 125XF IQ4 Camera System Manual |

Questions and Answers:

Need help?

Do you have a question about the PhaseOne XF IQ4 and is the answer not in the manual?

PhaseOne XF IQ4 Specifications

General