Front User button
This button is by default set to activate the depth of field function. Note
continued pressure on the button is required to operate this particular function,
but the modal nature of this button means some functions accessed via this
button require only a single press and release, for example, when reconfigured
for AF-Lock and AE-Lock.
Rear User button
From the factory the Rear User button is programmed to activate the camera’s
AE-L (Auto Exposure Lock) function, locking meter readings made in Auto
and Manual exposure modes. The Rear User button is customizable,
External shutter release control (B.O.B)
The XF Camera System gives you the option to customize the functionality of
the Phase One Break Out Box accessory. This is done by pressing the rear user
key and selecting UI Setup > Control Setup > External.
By default it works like a shutter release button, but a particularly useful
feature is the ability to activate the two-step mirror control and shutter release
instead.
This will make the external button — the B.O.B release button — act with a two
shot mirror up function, raising the mirror on the first press, and shooting on
the next. You activate the feature by selecting UI Setup > Control Setup >
External > MUP-Exp.
Front User Button
Rear User Button
B.O.B - Cable Release accessory
MIrror Up and Exposure
action with External
19Navigating the XF Camera System 19XF IQ4 Camera System Manual |
To Next Page
Loading...
Need help?
General
