Assigning AFr Mode button
Assigning a custom button to toggle AFr mode On and O
You will probably find it useful to be able to turn the AFr mode on and o
quickly, depending on the subject to hand. This can be done by assigning a
custom button to act as AFr mode toggle. Press the Rear Key and select UI
Setup > Control Setup. Then select the button that you want to customize,
and turn the Side Dial until you have selected AFr Mode.
Here we have assigned the Rear User Button as the toggle, but you can use
any of these buttons:
• Shutter Release Button
• Secondary Shutter Release Button
• Front User Button
• Rear User Button
• External Shutter Release (B.O.B.)
88Autofocus & Recompose modeXF IQ4 Camera System Manual |
To Next Page
Loading...
