Next, setup whether Aperture, Shutter Time and/or ISO should be
automatically controlled by OneShot AE. Pres the rear key and select
Capture Setup > Auto Exposure > OneShot AE. Then select Aperture, Shutter
Time or ISO and turn them On or O with the Rear Dial. Please note that you
can choose any combination and allow the camera to change all three values
automatically or just one to obtain the right exposure. By default, the XF
Camera is set to only change the Shutter Time, but you can, for instance,
change the OneShot AE feature to only change the ISO value to obtain the
proper exposure.
With everything setup as needed, just press the assigned button to active
the OneShot AE for the next shot.
OneShot AE options
94XF Camera Exposure ModesXF IQ4 Camera System Manual |
To Next Page
Loading...
