28
ROUTINE MAINTENANCE
Cleaning of evaporating tray
Clean the evaporating tray on the back regularly (every 6 months). The cleaning procedure is as
follows.
1. Remove 4 screws fixing the mounting bracket for the
evaporating tray and then remove the mounting bracket
and the evaporating tray.
The evaporating pipe is hot. Touching the evaporating
pipe during operation and immediately after stopping the
operation may cause injury.
2. Clean the evaporating tray.
3. Replace the evaporating tray and the mounting bracket
and fix them with 4 screws.
Evaporating tra
Mounting bracket
Evaporating
pipe
To Next Page
Loading...
