EasyManua.ls Logo

Phcbi MBR-705GR - Specifications and Performance Data; Technical Specifications

Phcbi MBR-705GR
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
38
SPECIFICATIONS
Product name Blood Bank Refrigerator
MBR-705GR
External dimensions W770 mm x D830 mm x H1955 mm
Internal dimensions W650 mm x D697 mm x H1500 mm
Effective capacity 622 L
Interior volume 360 blood bags (400 mL)
Exterior Painted steel
Interior Painted steel
Outer door Painted steel, Provided with 2-layer glass window
Inner door Acrylic resin, 3 doors
Insulation Rigid polyurethane foamed-in place
Drawer
Stainless steel x 6, Allowable load; 40 kg/drawer
Access port Inner diameter; 30 mm, Left side, Right side, Top
Cooling method Forced cool air circulation
Compressor Hermetic type, Output; 200 W x 1
Evaporator Fin and tube type
Condenser Wire and tube type
Refrigerant R-134a
Defrosting Cycle defrost + forced defrost, Fully automatic
Defrost heater 100 W
Temperature controller Electronic control system
Temperature display Digital display (in 0.1
o
C increments)
Fluorescent lamp White light 20 W (FL20SD)
Alarms High temp. alarm, Low temp. alarm, Power failure alarm, Door alarm
Battery For power failure alarm (DC 6 V 1100 mAh, Automatic recharge)
Remote alarm contact During alarm buzzer and power failure, Output; N.O.; “close”, N.C. “open”
Weight 213 kg
Accessories 1 set of key
Optional components Interface board (MTR-480)*
Design or specifications will be subject to change without notice.
Refer to the updated catalog when ordering an optional component.
* For the data acquisition system MTR-5000 user only.

Related product manuals