Philips 32PFL7674H - 4 Use Your Product; Switch TV On;Off or to Standby; Switch Channels; Adjust TV Volume

9
Tip
Though your TV consumes very little power •
when in standby, energy continues to be
consumed. When not in use for an extended
period of time, disconnect the TV power cable
from the power outlet.
Note
If you cannot locate your remote control and •
want to switch on the TV from standby, press
P/CH +/- on the side of the TV.
Switch channels
Press • P +/- on the remote control or
P/CH +/- on the side of the TV.
Enter a channel number using the •
Numeric buttons.
Use the channel • grid (see ‘Switch
channels with the channel grid’ on page
10).
4 Use your
product
This section helps you perform basic operations
(see ‘Use more of your product’ on page 14).
Switch your TV on/off or to
standby
To switch on
If the front LED indicator is off, press •
POWER at the side of the TV.
If the front LED indicator is red, press •
(Standby-On) on the remote control.
To switch to standby
Press •
(Standby-On) on the remote
control.
The front LED indicator switches to »
red.
To switch off
Press •
POWER at the side of the TV.
The front LED indicator switches off. »
English
EN