EasyManua.ls Logo

Philips 32PFL7674H - Use the TV Clock

Philips 32PFL7674H
77 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
29
Use the TV clock
You can display a clock on the TV screen. The
clock displays the current time using time data
received from your TV service operator.
Display the TV clock
You can display a clock on the TV screen,
displaying the current time.
1 When watching TV, press OPTIONS.
The options menu appears. »
2 Press the Navigation buttons to select
[Clock].
3 Press OK to conrm your choice.
The clock displays on the TV screen. »
Note
To disable the clock, repeat the procedure
above.
Tip
The clock is also accessible via the
[Setup]menu (see ‘Access the setup menu’ on
page 15).
Change the clock mode
By default, the clock mode is set to
[Automatic], syncing the TV clock to
Coordinated Universal Time (UTC). If your
TV cannot receive UTC transmissions, set
the clock mode to [Manual]. If clock mode is
[Manual], time data is based on your current
time zone (see ‘Step 1 Select your system’ on
page 37) and daylight saving conditions (see
Enable or disable daylight saving’ on page 30).
1 When watching TV, press (Home).
The home menu appears. »
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The » [Setup] menu appears.
2 Press the Navigation buttons to select:
[On]Enables subtitles.
[Off]Disables subtitles.
[On during mute]Displays subtitles
only when audio is muted.
3 Press OK.
Subtitles are enabled or disabled. »
4 Press BACK to exit or press
(Home) to go back to the home menu.
Select a subtitle language on digital TV
channels
Note
When you select a subtitle language on
a digital TV channel as described below,
the preferred subtitle language set in the
installation menu is temporarily overruled.
1 When watching TV, press (Home).
The home menu appears. »
2 Press the Navigation buttons to select
[Setup].
3 Press OK.
The » [Setup] menu appears.
4 Press the Navigation buttons to select
[Features] > [Subtitle language].
A list of subtitle languages appears. »
5 Press the Navigation buttons to select a
language.
6 Press OK to conrm your choice.
The subtitle language is applied. »
Note
Select preferred subtitle languages in the
[Languages]menu. Subtitles automatically
appear in the preferred languages when
enabled.
English
EN

Table of Contents

Other manuals for Philips 32PFL7674H

Related product manuals