Philips 37PFL7603D/10 - Option Settings; Tint Settings; Dealer Options

Alignments
EN 128 Q528.2E LB8.
Table 8-2 Tint settings
8.4 Option Settings
8.4.1 Introduction
The microprocessor communicates with a large number of I
2
C
ICs in the set. To ensure good communication and to make
digital diagnosis possible, the microprocessor has to know
which ICs to address. The presence / absence of these specific
ICs (or functions) is made known by the option codes.
Notes:
• After changing the option(s), save them by pressing the OK
button on the RC before the cursor is moved to the left,
select STORE in the SAM root menu and press OK on the
RC.
• The new option setting is only active after the TV is
switched “off” / “stand-by” and “on” again with the Mains
switch (the NVM is then read again).
8.4.2 Dealer Options
For dealer options, in SAM select “Dealer options” and then
“Personal options”.
Table 8-3 Dealer options
Colour Temp. R G B
32"
Cool 123 116 127
Normal 127 115 109
Warm 127 105 73
37"
Cool 127 102 116
Normal 127 97 100
Warm 127 89 69
42"
Cool 127 105 121
Normal 127 98 99
Warm 127 85 63
47"
Cool 127 127 125
Normal 127 122 97
Warm 127 109 50
Menu item Subjects Options Description
Personal Options Picture Mute On Picture is muted / not muted in case no input signal is detected at input connectors
Off
Virgin Mode On TV starts up / does not start up (once) with a language selection menu after the Mains switch is turned “on” for the
first time (virgin mode)
Off