Service Modes, Error Codes, and Fault Finding
EN 30 Q528.2E LB5.
Figure 5-8 “Active” to “Semi Stand-by” flowchart (non-DFI)
Semi Standby
Active
action holder: AVC
autonomous action
action holder: St-by
Wait 250ms (min. = 200ms)
Mute all sound outputs via softmute
Mute all video outputs
switch off LCD backlight
Force ext audio outputs to ground
(I/O: audio reset)
And wait 5ms
Switch off the display by sending the
PanelConfig.PanelOff (I²C) command to the Pacific
switch off ambient light
Set main amplifier mute (I/O: audio-mute)
Wait 100ms
I_17960_064.eps
220508
To Next Page
Loading...
