Philips 42PF9630A/37 - To Put the Remote Control Function Buttons Back to the Factory Mode

39
T
o put the remote control function buttons back to the factory mode
& Press the S
ELECT
button repeatedly to select T
V
mode.
é Press the OK button and the MUTE button simultaneously for at least 5 seconds.
All the
SELECT LEDS will light up.
“ Press the SELECT button
•
1x:
DVD/R i
s lit up
•
2x:
CBL i
s lit up
•
3x:
VCR i
s lit up
• 4x:
AUX is lit up
• 5x:
DVD/R, CBL, VCR, AUX are lit up.
‘ Press the OK button when one or all mode LEDS are lit.
T
he function buttons which were ‘learned’ will be erased or from the selected destination source or from all the external devices at
o
nce.
A
ll the buttons from the TV remote control will have their factory function again.