Philips 43HFL5114 - Page 57

- 56 -
o
[
Automatic NTP
]:
Date and time is
received via the network
o [Manual]: Date and time is set
manually but will not be remembered
after a power cycle. This option can be
used in combination with JAPIT or
SerialXpress to set the clock on startup
via commands
o
Navigate to the [
Source Channel
] menu
o You will see a list of installed channels,
one item will be highlighted, this is the
current selected channel where the TV
will obtain the clock from
o
Navigate to the [
NTP Settings
] menu
o You will see below items:
o [NTP Source]: When selecting
[Default] the TV will automatically
look for the clock via the network,
when [Custom NTP Server] is selected
you will be able to set a custom NTP
sever URL
o [Custom NTP Server URL]: Set the link
for a custom NTP Server URL
o
Navigate to the [
Manual Date and Time
Settings] menu
o You will see below items:
o [Date]: You can set the date manually
o [Time]: You can set the time manually
Note: Above menus are only accessible
when [Source] is set to [Manual]
o
Navigate to the [
Time Zone Setting
]
menu
Note: This menu in not accessible when
[Source] is set to [Manual]
o You will see below items:
o [Time Zone Country]: You can select
the country where you are
o [Time Zone Region]: You can change
the region if multiple regions are