12 AutomaticChannelSetup(cont'd)
• eeeeeee =mmeeeeeeeeeeeeeeeeeeeee =mmeeeeeeeeeeeeeeeeeeeee =mmeeeeeeeeeeeeeeeeeeeee =mmeeeeeeeeeeeeeeeeeeeee =mmeee*
AddinglDeleting Channels
Press the MENU button.
/_[OI_DIUSTPRESS./_- -'_
EXIT
PRIM. SETUP
_T_u_AMI/VCRPROGRAM
VCR SETUP
Press the PLAY/A button or the STOP/v button to select
CHANNEL.
01 pTPRESS"'"
EXIT
PRIM. SETUP
_Rilui_AMI/VCRPROGRAM
VCR SETUP
Press the CH(annel) Atk7 button to select the channel
you want to add or delete.
/_TTO ADJUST PRESS _1/I,,- _'_
CH23 _ ]
EXIT
PRIM. SETUP
VCR PROGRAM
VCR SETUP
Press the F.FWD/I_ button or the REW(ind)/_l button to
select SAVED (to add that channel) or DELETED (to
delete that channel).
Repeat steps 3-4 to add or delete other channels.
Press the STATUS/EXIT button.
Programming of the channel you added or deleted will appear.
To review the channels memorized
by the TV/VCR, follow these steps.
7) Press the MENU button.
2) Press the PLAY/A button or the
STOP/V button to select PRIM.
SETUP. Press the F.FWD/I_ button.
3) Press the PLAY/A button or the
STOP/V button to select CH MEM-
ORY REVIEW. Pressthe F.FWD/I_
button. A list of programmed chan-
nels will appear on the screen.
4) If all the programmed channels
don't fit on the screen, press the
F.FWD/I_ button. If you do not
press the F.FWD/I_ button within
70 seconds, the remaining channels
will appear on the screen. (If there
are no remaining channels, the pre-
vious menu will appear.) Or press
the REW(ind)/_l button to see the
previous screen of channels.
5) Press the STATUS/EXIT button
once or twice.
To Next Page
Loading...
