38 Repeat Play
Follow the steps below to program the TV/VCR to play a tape
over and over,
Press the MENU button.
VCR PROGRAM
VCR SETUP
REMINDER
BRIGHTNESS
PICTURE
Press the PLAY/A button or the STOP/V button to select
VCR SETUP, then press the F.FWD/I_ button.
_> CR SETUP 1
O#Zp, A LAY[ON
BLUE BACKGROUND [ON]
2-3
E:D
[DE]
SPEED
(DO
(ZD C) C) (ZD
Press the PLAY/A button or the STOP/_ button to select
REPEAT PLAY, then press the F.FWD/_ button so that
ON appears beside REPEAT PLAY.
VCR SETUP 1
ONE TIME PLAY
REPEAT PLAY [ON]
ON-SCREEN MODE
I DEFEAT RECORDING [OFF]
I BLUE BACKGROUND [ON]
SELECT A_ CHOOSE I_
_. SO END PRESSEXIT
Press the STATUS/EXIT button. Now, when a tape has fin-
ished playing, the TV/VCR will rewind it and start playback again.
(TV programming will appear while the tape is rewinding.)
Helpful Hints
• The TV/VCRwill stay in Repeat Play
mode until you set ONETIME PLAY
to ON, even if the TV/VCRis turned
off. Toset ONE TIMEPLAYto ON,
follow steps 1-2 above. Then, press
thePLAY/Abutton or the STOP/_
button to select ONETIME PLAY.
Press the F.FWD/I_ button so that
ON appears beside ONE TIME
PLAY. Then, press the STATUS/EXIT
button.
• The real-time counter memory will
not function during Repeat Play
mode.
To Next Page
Loading...
