Inserta tapeintheTV/VCR. The power will come on. If the
tape's record tab has been removed, playback should start auto-
matically.
If playback does not start automatically, press the
PLAY/A button to start playback.
Press the STOP/V button on the remote control or the
STOP/EJECT button on the TV/VCR once to stop play-
back.
Press the REW(ind)/_l button to rewind the tape.
When the tape has finished rewinding, press the
STOP/EJECT button on the TVNCR to remove the tape.
S-VHS Quasi Play Back (SQPB)
This unit has a SQPBfunction that allows you to view a tape
recorded in S-VHS format. A tape recorded in S-VHS format
will play the same as a tape recorded in normal format. This
unit detects whether the tape is recorded in S-VHS format or in
nor-real format.
Press the STOP/EJECT button
on the TV/VCR.
Helpful Hints
• If the tape you want to play is
already in the TV/VCR, turn on the
TV/VCR power, then press the
PLAY/A button.
• Playback features and options are
on pages 38-42.
• When you play a tape recorded in
S-VHS format on this unit, you can
not get the high resolution that
would be available on an S-VHS
VCR. Noise lines (black and white
streaks) may appear on the picture.
To Next Page
Loading...
