Press the PLAY/A button or the STOP/I' button to select
SET PBS CH. AUTO. Then, press the F.FWD/I_ button.
SET AUTO CLOCK
IO TIME - _ : - _
DATE - - / - - / ....
NOW SEARCHING
END PRESSEXIT
NOW SEARCHING flashes on the TV/VCR screen.
When the TV/VCR finds the PBS channel, the time will
appear on the screen. Press the STATUS/EXIT button.
AT AUTOCLOCK
I TIME 06 : 30 PM
DATE 07 / 01 / 2000
SATURDAY
\ TO END PRESSEXIT
,',_;If CANNOT FIND CLOCK DATA flashes on the TV/VCR
screen, you will be prompted to turn off the TVNCR.
Turn off the TV/VCR. Leave it off for several minutes. When
you turn on the TV/VCR again, the clock will be set.
SET AUTO CLOCK _'_
TIME - - : - -
DATE - - / - - / ....
CANNOT FIND CLOCK DATA
END PRESSEXIT
Wait for the TV/VCR to find
the time.
° iD
G3 CE)
GEE)
SPEED
OO
_E_OTR _ T_CmNG _ _JTE
0000
J
Helpful Hints
• To display the time on the TV/VCR
screen, press the STATUS/EXITbut-
ton. Details are on page 27.
• You cannot use the AUTO CLOCK
feature if you don't receive a PBS
channel that carries a time signal in
your area. Set the clock manually.
• Automatic clock setting is not possi-
ble with a mobile connection.
To Next Page
Loading...
