Philips CCB092AT - Page 18

18 SettingtheClock(cont'd)
• eeeemee =mmeeeeeeeeeeoooeeeeemee =mmeeeeeeeeeeoooeeeeemee =mmeeeeeeeeeeoooeee,,,e= =mmeeeeeeeeeeoooeeeeemee =mmeeee
5
Press the PLAY/A button or the STOP/V button to Wait for the TV/VCR to
select SET PBS CH. MANUAL. Then, press the F.FWD/I_ find the time.
button.
TO CLOCK (PBS) CH 02 "_
TIME - - : - - /
/
DATE - - / - - / ....
SELECT CHANNEL NUMBER
END PRESSEXIT
Use the Number buttons to select your PBS station.
T0CLOCK/_BS_CH12
TIME - - : - - |
j
DATE - - / - - / ....
NOW SEARCHING
END PRESSEXIT
\ J
NOW SEARCHING flashes on the TV/VCR screen.
When the TV/VCR finds the clock data, the time will
appear on the screen. Press the STATUS/EXIT button.
TIME 06 : 30 PM
DATE 07 / 01 / 2000
SATURDAY
END PRESSEXIT
._;If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you know another PBS channel,
press the PLAY/A button or the STOP/V button to
choose SELECT NEW PBS CH. Then, press the
F.FWD/I_ button. Repeat step 6.
._; If CANNOT FIND CLOCK DATA flashes on the
TV/VCR screen and you do not know another channel,
press the PLAY/A button or the STOP/V button to
select SET PBS CH. AUTO. Then, press the F.FWD/I_
button. The TV/VCR will search for the PBS channel automati-
cally.
• If the PBS channel is found, the time will appear on the screen.
• If the PBS channel is not found, you will be prompted to turn
off the TV/VCR. Leave it off for several minutes. When you turn
on the TV/VCR again, the time will be set.
©
Helpful Hints
• If you have an Antenna hookup, you
may select channels 2-69 at step 6.
If you have a cable connection, you
may select channels 1-125 at step
6. Details about available memo-
rized channels are on page 12.
• To display the time on the TV/VCR
screen, press the STATUS/EXITbut-
ton. Details are on page 27.