39
Disc rating exceeds the restrict setting.
Change the rating settings to lower one.
Disc region code is not compatible with
the unit. Use disc with proper region code.
No image
Parking brake wire connection is incorrect.
Check the parking wiring.
Video DVD settings do not match with
the DVD. Adjust video DVD settings.
Video connection is improper. Check the
connections.
Noise in broadcasts.
Signals are too weak. Select other stations
with stronger signals.
Check the connection of the car antenna.
Change broadcast from stereo to mono.
Preset stations lost.
Battery cable is not correctly connected.
Connect the battery cable to the terminal
that is always live.
Fuse is broken
The Fuse type is incorrect. Replace it with
a 15A fuse.
Speaker wire or power wire is grounded.
Check the connections.
Display show ERR-12
USB/SD/MMC data error. Check the USB
device or SD/MMC card.
12 Troubleshooting
Warning
Never remove the casing of this apparatus.
the system yourself.
If you encounter problems when using this
requesting service. If the problem remains
(www.philips.com/welcome). When you
is nearby and the model number and serial
number are available.
No power
Car engine has not been started. Start
the car engine.
Connections is incorrect.
Fuse has been damaged. Replace fuse
(see ‘Replace fuse’ on page 39).
No sound
Volume is too low. Adjust volume.
Speaker connections is incorrect.
No response to the remote control
Ensure that the path between the remote
control and the unit is clear from obstacles.
control directly at the unit.
Switch F/R to correct position (F for front
control and R for rear control).
The function does not work. Refer to the
instructions.
Replace the remote control battery.
Disc does not play
Disc is upside down. Ensure the printed
side is upwards.
from the center.
Disc is defective. Try another disc.
incompatible disc is used. Try another disc.
English
EN
To Next Page
Loading...
