Philips D270 - Intercom and Conference Calls; Calling Another Handset (Intercom); Setting Up a Conference Call

EN 17
Make a conference call
5 Intercom and
conference calls
An intercom call is a call to another
handset that shares the same base station.
A conference call involves a conversation
between you, another handset user and the
outside callers.
Make a call to another handset
Note
If the base station only has 2 registered
handsets, press to call the other
handset.
A 3-way conference call is between you,
another handset user and the outside callers.
It requires two handsets to share the same
base station.
1 Press on the handset during a call.
2 Press again to select [INTERCOM].
3 Press to answer call on destination
handset.
[INTERCOM] displays.
4 Press and hold on either handset.
[CONFERENCE] displays.
Note
• If a handset hangs up during the
conference call, the other handset
remains connected to the external call.
• If the external caller or recipient hangs
up during the conference call, the two
handset remains connected to each
other.
• Only when both the two handsets and
the external caller or recipient hang up
during the conference call, can the call
ended.
1 Press .
For multi-handset versions, the
handsets available for intercom are
displayed, then go to step 2.
For two-handset versions, the other
handset rings, then go to step 3.
2 Select a handset, then press to
conrm.
The selected handset rings.
3 Press on the selected handset.
The intercom is established.
4 Press to end the intercom call on
either handset or put the initiating
handset back to the cradle.