Philips D270 - Base Station Settings; Base Ringtone and Dial Mode; Deregistering Handsets

EN 31
You can select from 5 ringtones.
Set the base’s ringtone
1
Press .
2 Select [BS SETTINGS] > [BS RINGER],
then press to conrm each selection.
3 Select a volume level, then press to
conrm.
The setting is saved.
Ring settings
You can select among 5 ringtone volume
levels or [OFF].
Set the base’s ringtone volume
1
Press .
2 Select [BS SETTINGS] > [RING VOLUME],
then press to conrm each selection.
3 Select a volume level, then press to
conrm.
The setting is saved.
Note
• If the ringer volume is set to o, the base
is silenced for all incoming calls.
13 Base settings
Set dial mode
The phone supports tone (DTMF) and pulse
(rotary) dial. The dial mode is preset to touch
tone dialing. If you have pulse (rotary) service,
you need to change the dial mode to pulse
dialing before using the telephone to make
a call.
1 Press .
2 Select [BS SETTINGS] > [DIAL MODE],
then press to conrm each selection.
3 Select [TONE] or [PULSE], then press
to conrm.
The setting is saved.
• The preset PIN is 0000. If the PIN is
incorrect, the deregistration fails and the
screen returns to the previous menu.
• A handset cannot deregister itself.
Note
Deregister the handsets
1 Press .
2 Select [BS SETTINGS] > [DELETE HS],
then press to conrm each selection.
[PIN? - - - -] displays; the “- - - -”
cursor ashes. Default 4-digit PIN is
0000.
To erase a character, press .
The PIN will be masked as ****.
3 Enter the 4-digit PIN and then press
to conrm.
The deleted handset will be
removed from the registered
handsets list, and the antenna icon
will disappear. [REGISTER] displays.
Note
Available only for D275.