Philips D270 - Flash Time and ECO Mode; Changing the PIN Code

EN 32
Change PIN
1 Press .
2 Select [BS SETTINGS] > [CHANGE PIN],
then press to conrm each selection.
[OLD PIN? - - - -] displays; the “- - - -”
cursor ashes. Default 4-digit PIN is
0000.
To erase a character, press .
The PIN will be masked as ****.
3 Enter the current 4-digit PIN and then
press to conrm.
If the old PIN is correct, it will show
[NEW PIN? - - - -] with the “- - - - “
cursor ashes.
4 Enter the new PIN, then press .
5 Re-enter the new PIN to double conrm.
Press to save.
The setting is saved.
You can reduce transmission power by setting
the ECO mode.
1 Press .
2 Select [BS SETTINGS] > [ECO MODE],
then press to conrm each selection.
3 Select [ON] or [OFF], then press to
conrm.
The setting is saved.
Set ECO mode
Set ash time
1 Press .
2 Select [BS SETTINGS] > [FLASH TIME],
then press to conrm each selection.
There are 3 options: SHORT, MEDIUM
(by default), and LONG.
3 Select an option, then press to
conrm.
The setting is saved.
Make sure that the recall time is set correctly
before you can answer a second call. In normal
case, the phone is already preset for the recall
duration. You can select among 3 options:
[Short], [Medium] and [Long].The number of
available options varies in dierent countries.
For details, consult your service provider.