Philips D270 - Registering Additional Handsets; Handset Registration Procedure

EN 33
14 Registration
• If the PIN is incorrect or no base is found
within a certain period, the handset will
fail to register to the base. [REGISTER]
displays if the handset fails to register to
the base.
• If registration fails, unplug the power
adapter from the base station and plug
it back. Wait for 15 seconds, and then
repeat the registration procedure.
• The preset PIN is 0000.
Note
You can register additional handsets to the
base station. The base station can register up
to 4 handsets.
Register additional handsets
1 If the handset is in [REGISTER] status,
press .
2 Select [REGISTRATION] , then press
to conrm.
[PIN? - - - -] displays; the “- - - -”
cursor ashes. Default 4-digit PIN is
0000.
To erase a character, press .
The PIN will be masked as ****.
3 Enter the 4-digit PIN and then press
to conrm.
[PLEASE WAIT] displays.
4 Press and hold at the telephone base
for about ve seconds.
You hear a beep when the registration
process completes.
Registration is complete in less than
1 minute. The base automatically
assigns a handset number to the
handset.