Philips D270 - Rename the Handset; Set the Date and Time; Set the Display Language; Set Alarm

EN 30
Rename the handset
You can rename the handset for your easy
reference with the base.
The name of the handset can be up to 10
characters. It is displayed on the handset
screen in standby mode.
1 Press .
2 Select [HS SETTINGS] > [RENAME HS],
then press to conrm each selection.
3 Enter and edit the name, To erase a
character, press .
4 Press to conrm.
The setting is saved.
Set the date and time
For information, see ‘Set the date and time’
in Chapter 3 ‘Get started ‘, Section ‘Congure
your phone’.
Set the display language
For information, see ‘Set the display language’
in Chapter 3 ‘Get started ‘, Section ‘Congure
your phone’.
Set alarm o
1
Press .
2 Select [HS SETTINGS] > [ALARM], then
press to conrm each selection.
3 Select [OFF], then press to conrm.
The setting is saved.
You can set your handset to auto answer the
call once you lift it from the base.
1 Press .
2 Select [HS SETTINGS] > [AUTO
ANSWER], then press to conrm
each selection.
3 Select [ON] or [OFF], then press to
conrm.
The setting is saved.
Set auto answer
You can set the alarm alert with handset.
Set alarm on and alarm time
1
Press .
2 Select [HS SETTINGS] > [ALARM], then
press to conrm each selection.
3 Select [ON], then press to conrm.
4 Enter the alarm time (in 12-hour or 24-
hour setting, as set in the TIME FORMAT
setting).
The screen displays SNOOZE, then
press to conrm.
5 Select [ON] or [OFF], then press to
conrm.
The setting is saved.
Set alarm
Set mailbox
1 Press .
2 Select [HS SETTINGS] > [MAILBOX], then
press to conrm each selection.
NUMBER - displays; - cursor ashes.
3 Enter a number and then press to
conrm.
Press to delete a character.
Press
/ to move the cursor
left or right.