Philips D270 - Managing Outgoing and Incoming Messages

EN 36
Note
You can no longer listen to the outgoing
message when there is an incoming call.
Listen to the outgoing message
1
Press .
2 Select [ANS. MACHINE] > [TAM
SETTINGS] > [OGM SETTINGS], then
press to conrm each selection.
3 Select [ANS & REC] or [ANSWER ONLY],
then press to conrm.
4 Select [PLAYBACK], then press to
conrm.
You can listen to the current
outgoing message.
Record memo
No matter the answering machine is on or
o, you can record memos as reminders for
yourself.
1 Press .
2 Select [ANS. MACHINE] > [MEMO] >
[ANSWER MOE], then press to
conrm each selection.
[RECORDING] displays.
3 Press to stop and save the recording
Press to stop the recording without
saving and return to previous menu
option.
-OR-
Record an outgoing message
The newly recorded outgoing message
automatically replaces the old one.
Note
Make sure that you speak close to the
microphone when you record an outgoing
message.
The outgoing message is the message your
caller hears when the answering machine
picks up the call. The answering machine has
2 pre-recorded outgoing message: [ANS &
REC] and [ANSWER ONLY].
Outgoing messages
1 Press .
2 Select [ANS. MACHINE] > [TAM
SETTINGS] > [OGM SETTINGS], then
press to conrm each selection.
3 Select [ANS & REC] or [ANSWER ONLY],
then press to conrm.
4 Select [RECORD MESS], then press
to conrm.
[RECORDING] displays;
5 Start recording close to the microphone
after the beep.
6 Press to stop recording.
You can listen to the newly recorded
outgoing message on the handset.
Restore the default outgoing
message
1
Press .
2 Select [ANS. MACHINE] > [TAM
SETTINGS] > [OGM SETTINGS], then
press to conrm each selection.
3 Select [ANS & REC] or [ANSWER ONLY],
then press to conrm.
4 Select [RECORD MESS], then press
to conrm.
[RECORDING] displays;
Note
In order to restore the default outgoing
message successfully, make sure that you
don’t speak close to the microphone and
press to stop recording as soon as
possible when you record an outgoing
message.
5 Press to stop recording.
The default outgoing message is
restored.