Philips D270 - Incoming Messages

EN 37
Incoming messages
When you receive new TAM messages, the
new message indicator ashes on the
handset.
If you have new messages, the telephone
plays only the new messages (oldest rst).
If there are no new messages, the telephone
plays back all messages (oldest rst).
Note
• Make sure you set date and time correctly.
• If you pick up the phone when the caller
leaves a message, the recording stops and
you can talk to the caller directly.
• If the memory is full, the answering
machine switches to [Answer only]
automatically. Delete old messages to
receive new ones.
From the handset
• Press > [ANS. Machine] > [MSG
PLAYBACK], then press to conrm
each selection.
PLAYING MSG displays.
New messages start playing. Old
messages start playing if there is no
new message.
• Press / to increase or decrease
the volume.
• Press to enter the options menu.
• Press to stop listening (D275 only).
• To play the previous message or replay
the current message, press (D275
only).
• To play the next message, press
(D275 only).
• To delete the current message, press
(D275 only).
Note
You can only delete the read messages. No
deleted messages can be recovered.
Delete an incoming message
From the base
Press when you listen to the message.
The current message is deleted.
From the handset
1. When you listen to the message, press
to enter the options menu.
2. Select [Delete], then press to conrm.
The current message is deleted.
- OR -
1. When you listen to the message, press
(D275 only).
From the base
• To start or stop listening, press .
• To adjust the volume, press
or .
• To play the previous message or replay
the current message, press .
• To play the next message, press .
• To delete the current message, press .
Note
No deleted messages can be recovered.
Listen to the incoming messages
Once the message is played, it will be saved
automatically and the icon will disappear.