English
14
Connecting the audio cables
This connection enables you to listen to
the sound.
Option 1: Using an audio cable
You can connect the recorder to a two
channel stereo system or receiver in
order to enjoy the stereo sound system.
Use an audio cable (red/white plugs) to
connect the AUDIO-L/R jacks to one of
the following devices with the same input
jacks.
– a stereo system (for example, TV or
mini system).
– a receiver with two channel analogue
stereo.
Step 1: Basic Recorder Connections (continued)
Option 2: Using a coaxial cable
You can connect the recorder to an AV
ampli er/receiver with a digital
multichannel sound decoder in order to
enjoy multichannel surround sound.
Use a coaxial cable (not supplied).
Connect the COAXIAL (DIGITAL
AUDIO OUT) jack on the recorder to
the digital input of the receiver/ampli er.
Before you start operating, set the digital
audio output settings accordingly (see the
chapter “System Menu Options – Audio
settings – Digital Output”).
If the audio setting does not match your
stereo’s capabilities, the stereo may
produce a strong, distorted sound or no
sound at all.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
DIGITAL IN
AU D IO
OUT
S-V ID E O
IN
VIDEO IN
TV
Option 2
Option 1
AV ampli er/
receiver
OR
1_dvdr3460-97_um_en_26851a.indd 141_dvdr3460-97_um_en_26851a.indd 14 2007-08-27 1:04:31 PM2007-08-27 1:04:31 PM
To Next Page
Loading...
