Philips DVDR3460 - Dividing Title (DVD±RW Only); Erase Part of a Title (DVD±RW Only)

English
36
Edit Recordings (continued)
F
Once complete, move to { Finish } in the
menu and press OK.
 The information panel is now updated.
Dividing title (DVD±RW only)
You can divide a title into two or more
titles. Note that the title length must be
more than 6 (six) seconds.
Warning! Once a title has been divided,
it cannot be reversed.
A
Press DISC-MENU.
B
Use STWX keys to select the
preferred title and press OK.
 The editing menu appears..
C
Use ST keys to select { Edit } and
press OK.
D
Highlight { Divide } and press OK.
 The divide title screen appears. By
default, the title screen will be in pause
mode.
Disc Menu
PLAY
BACK
Play BackConfirm
OK
DVD+RW
DVD+RW
DVD+RW
Title No.1 Title No.2
Divide
Title: 1
Divide
OK
Cancel
00:00:00
E
Press u to start playback.

To make a fast search, press and hold
.> keys.

To locate a speci c frame during
playback, press u to pause the
playback, then press W or X repeatedly.
F
With { Divide } highlighted, press OK to
set the dividing point.
G
With { OK } highlighted, press OK start
divide.
 Once complete, a new title will be
shown at the disc menu index screen.
Erase part of a title
(DVD±RW only)
This option allows you to erase
unwanted scenes from the recording
(e.g. commercial scene). To do it, you
have to set the beginning (point A) and
end (point B) of the scenes to erase.
A
Press DISC-MENU.
B
Use STWX keys to select the
preferred title and press OK.
 The editing menu appears.
C
Use ST keys to select { Edit } and
press OK.
D
Highlight { A-B Erase } and press OK.
 The title screen will be in pause mode
by default.
Disc Menu
PLAY
BACK
Play BackConfirm
OK
DVD+RW
DVD+RW
DVD+RW
Point A Point B
A-B Erase
Title: 1
Set Point A
Set Point B
OK
Cancel
00:00:00
E
Press u to start playback.

To make a fast search, press and hold
.> keys.

To locate a speci c frame during
playback, press u to pause the
playback, then press W or X repeatedly.
F
With { Set Point A } highlighted, press
OK to set the beginning point.
G
With { Set Point B } highlighted, press
OK to set the end point.
H
With { OK } highlighted, press OK to
start A-B erase.
Helpful Hint:
– To recover the deleted scenes, select
{ Undo Erase } in the edit menu.
1_dvdr3460-97_um_en_26851a.indd 361_dvdr3460-97_um_en_26851a.indd 36 2007-08-27 1:04:35 PM2007-08-27 1:04:35 PM