English
19
Step 3: Installation and Setup
Before you start ...
When you complete the connections and
turn on the recorder for the rst time,
you should see the initial setup menu
appears on the TV. Follow the
instructions on the TV to complete the
installation.
Welcome
OK
Next Page
Before using the recorder,
please complete the initial installation.
Otherwise, see the chapter “System
Menu options” to make several basic
settings: Menu language, Auto Install and
Clock Setting. This will optimise the
performance of this recorder.
Finding the correct viewing
channel
A
Press STANDBY-ON on the recorder
to turn it on.
B
Turn on the TV and set it to the correct
video-in channel.
You may go to Channel 1 on your TV,
then press the Channel Down button on
your TV’s remote control until you see
the Video In channel.
You may press
° button repeatedly
on your TV’s remote control.
Usually this channel is between the
lowest and highest channels and may be
called FRONT, A/V IN, VIDEO. See your
TV manual for more details.
Initial recorder setup
The initial setup menu will appear on the
TV when you rst power up the recorder.
These settings will help you to set up the
basic recorder features easily, including
TV programme installation, language and
clock settings.
Welcome
OK
Next Page
Before using the recorder,
please complete the initial installation.
A
Press OK on the remote control to
continue.
The menu language appears.
The language options are different
depending on your country or region. It
may not correspond to the illustrations
shown on the user manual.
Menu Language
OK
Next Page
BACK
Prev Page
Select a menu language.
English
TIPS: Press OK to go to the next setup page. Press BACK to return to the previous setup page.
1_dvdr3460-97_um_en_26851a.indd 191_dvdr3460-97_um_en_26851a.indd 19 2007-08-27 1:04:32 PM2007-08-27 1:04:32 PM
To Next Page
Loading...
