English
33
Switching camera angles
This option is only available with DVDs
that contain sequences recorded from
different camera angles. This allows you
to view the picture from different angles.
A
During playback, press DISPLAY to
display the video playback options menu.
B
Press T repeatedly to highlight
{ Angle }.
C
Use W X keys to select a desired camera
angle available on the disc.
If multiple angles feature is supported,
the icon will appear.
Time search
This option allows you to skip to a
speci c point in the current disc.
A
During playback, press DISPLAY to
display the video playback options menu.
B
Highlight time search icon in the menu
and press OK.
The elapsed playing time will change
to time input eld.
_ _ : _ _ : _ _
C
Use the numeric keypad (0-9) to input
the 6-digit time.
Playback skips to the selected time.
Resume playback from the
last stopped point
This option is only available with DVDs/
VCDs. The recorder is able to resume
disc playback from its last stopped point.
Before you start..
Make sure that the resume mode setting
is turned on, see the chapter “Playback
settings - Resume”.
Load in a disc and press u to start
playback from the last stopped point.
To cancel the resume mode and
start playback from the beginning
When playback stopped, press STOP x
again.
Additional Playback Features (continued)
TIPS: The operating features described here might not be possible for certain discs.
Always refer to the instructions supplied with the discs.
1_dvdr3460-97_um_en_26851a.indd 331_dvdr3460-97_um_en_26851a.indd 33 2007-08-27 1:04:35 PM2007-08-27 1:04:35 PM
To Next Page
Loading...
