Philips DVDR3460 - Video Settings

English
45
System Menu Options (continued)
Video settings
Progressive Scan
Progressive scan delivers a higher picture quality than the
standard interlaced TV channel scan. It only works when you have
connected the recorder’s Y Pb Pr jacks to your TV that supports
the progressive video input. Otherwise, the image may not appear
or will be distorted. Refer to your TV user manual for more
information.
Use ST keys to select one of the options and press OK to
con rm.
{ On } – Select to enable progressive scan feature.
{ Off } – Select to enable interlaced feature.
TV System
The colour system that matches the connected TV. Only then will
it be possible to play a DVD on this recorder.
Use ST keys to select one of the options and press OK to
con rm.
{ AUTO } – Select this to automatically change the
video signal of an NTSC disc and output it
to its format.
{
NTSC } – Select this if the connected TV set has the
NTSC colour system. It will change the
video signal of a PAL disc and output it to
NTSC format.
{
PAL } – Select this if the connected TV set has the
PAL colour system. It will change the video
signal of an NTSC disc and output it to PAL
format.
1_dvdr3460-97_um_en_26851a.indd 451_dvdr3460-97_um_en_26851a.indd 45 2007-08-27 1:04:36 PM2007-08-27 1:04:36 PM