English
42
Playback settings (underlined options are the factory default settings)
Audio Language
Select the preferred audio language for DVD playback.
Subtitle Language
Select the preferred subtitle language for DVD playback.
Notes:
– If the selected audio/subtitle language is not available on the
disc, the disc’s default setting language will be used instead.
– For some DVDs, the subtitle/audio language can only be
changed via the DVD disc menu.
TV Shape
Set the aspect ratio of the recorder according to the TV type
you have connected.
{ 4:3 PS } – Select this for a full-height picture with
both side trimmed.
{
4:3 LB } – Select this for a ‘wide screen’ display with
black bands on the upper and lower
portions of the TV screen.
{ 16:9 } – Select this for wide screen TV (frame ratio
16:9).
Resume
With this feature, you can resume last played disc playback from
its last stopped point.
{
On } – Turn on the resume mode. The recorder
will auto resume playback of the disc from
its last stopped position.
{ Off } – The disc will always start from the
beginning when you load a disc or start
playback.
Note: To cancel the resume option, press the OPEN/CLOSE key
on the remote control.
System Menu Options (continued)
1_dvdr3460-97_um_en_26851a.indd 421_dvdr3460-97_um_en_26851a.indd 42 2007-08-27 1:04:36 PM2007-08-27 1:04:36 PM
To Next Page
Loading...
