English
46
System Menu Options (continued)
Audio settings (underlined options are the factory default settings)
Downmix
Select the method for audio downmix to two channels when you
play a DVD which is recorded in Dolby Digital format.
{ LT/RT } – Select this if the recorder is connected to
a Dolby Pro Logic decoder.
{ Stereo } – Select this to downmix the multi-channel
audio signals to two channels which
delivers sound from only the two front
speakers.
Digital Output
This setting is only required if you are using the recorder’s
coaxial jack to connect other audio/video device.
{ PCM } – Select this if the connected device is not
capable of decoding multi-channel audio.
The system will convert the Dolby Digital
and MPEG-2 multi-channel signals to PCM
(Pulse Code Modulation).
{ Automatic } – The audio signals will be output according
to the audio stream on disc.
Night Mode
This mode optimizes playback of sound at low volume. High
volume outputs will be softened and low volume outputs are
brought upward to an audible level.
{ On } – Turn on night mode.
{ Off } – Turn off night mode feature. Selects this
to enjoy surround sound with its full
dynamic range.
1_dvdr3460-97_um_en_26851a.indd 461_dvdr3460-97_um_en_26851a.indd 46 2007-08-27 1:04:36 PM2007-08-27 1:04:36 PM
To Next Page
Loading...
