English
17
Step 2: Optional Connections (continued)
Connecting to a VCR and
Cable Box/Satellite Receiver
A
Connect the Antenna/Cable TV signal to
the antenna input (RF IN) jack on the
Cable Box/Satellite Receiver.
B
Use an RF antenna cable to connect the
antenna output (RF OUT) jack on the
Cable Box/Satellite Receiver to the
ANTENNA-IN
jack on the
recorder.
C
Use another RF antenna cable (not
supplied) to connect the TV-OUT
jack on the recorder to the antenna input
jack on the TV.
D
Use the audio/video cables to connect
the VIDEO/AUDIO INPUT (red/
white/yellow) on the DVD recorder to
the matching VIDEO/AUDIO output
jacks on the VCR.
E
Use the audio/video cables to connect
the VIDEO/AUDIO OUTPUT (red/
white/yellow) on the DVD recorder to
the matching VIDEO/AUDIO input jacks
on the TV.
Helpful Hints:
– You may use the S-VIDEO (Y/C) jack
instead of VIDEO (CVBS) jack if the
connected device has the same S-VIDEO
input/output jack. This video connection
provides better picture quality.
TIPS: Before making or changing any connections, make sure that all the devices are disconnected
from the power outlet.
VIDEO
IN
OUT
IN
AUDIO
L
AUDIO
R
VIDEO
OUT
AUDIO
L
AUDIO
R
VHF/UHF
RF IN
VHF/UHF
RF OUT
AU D IO
OUT
S-V ID E O
IN
VIDEO IN
TV
RF
S-VIDEO
OUT
IN
AUDIO
R L
VIDEO
To Next Page
Loading...
