Philips EasyKey 7200 - User Information Deletion: Delete User PIN Code; User Information Deletion: Delete All PIN Codes; User Information Deletion: Delete One-Time PIN Code

16 17
Deadlock from inside
5.How to use your EasyKey
Unlock | Unlock from outside
Unlock | Unlock from inside
1
Touch the keypad and
light up the buttons.
2
Enter the registered
user PIN code and press [#]
to conrm.
3
After hearing a voice
prompt of “Door opened”, press
the handle to open the door.
Philips EasyKey employs indoor
fast opening motise allowing
you to directly press the handle
to unlock.
When you want to open the door
from inside, please make sure the
safe handle switch is toggled to
green scale and the safe handle
function is disabled.
1
Place your registered
nger properly on the sensor.
2
After hearing a voice
prompt of “Door opened”,
press the handle to open
the door.
1
Place your registered
card on the card reader.
2
After hearing a voice
prompt of “Door opened”,
press the handle to open
the door.
With handle
2
1
2
2
3
1
1
Lock | Lock from outside/inside
Lift the handle after closing
the door. Then the bolt will
pop up and door will be
locked.
Lift the handle after closing
the door. Then the bolt will
pop up and door will be
locked.
Lock from inside
Lock from outside
When the EasyKey is locked, you can
rotate the knob to red scale (as shown
in the left image) to enable inside
deadlock. Also rotating the knob to
green scale can disable the function.
With User PIN code With ngerprint With card
Touch
keypad
Press the
handle
Press the
handle
Press the
handle
Card
reader
Enter a
PIN code
Fingerprint
Attention