Philips EasyKey 7200 - Get to Know Your EasyKey; Outside Escutcheon; Inside Escutcheon

10 11
◆How to enter master mode:
1
Press [#] key before inputting
any other numbers. After hearing a
voice prompt of "Enter master PIN
code", enter your master PIN code
and conrm with [#]. Then you are in
master mode.
4. How to set up your EasyKey
Pre-setup Instructions:
◆There are 2 modes in the EasyKey: General mode and dual verication mode.
00
01
02
03
04
05
06
07
08
09
Number
Name Fingerpr int PIN Code Card
◆Icon annotation
General mode
Dual verication mode
Enter the new master PIN code and press
[#] to conrm. Re-enter the new Master
PIN code and press [#].After hearing a
voice prompt of “Succeeded”, press [*]
several times until you exit master mode.
Press [1] to modify master PIN code.
1
Press [#], enter master PIN code and
press [#] to conrm.
User settings
Press [#], enter master PIN code and
press [#] to conrm.
Press [2] to enter user registration, then
press [1] to register a new user PIN code,
which will be automatically numbered and
broadcasted by the system.
1
2
Register a user PIN code
Enter a one-time user PIN code of 6 to
12 digits and press [#] to conrm. Re-
enter and press [#] to conrm. After
hearing a voice prompt of “Succeeded”,
press [*] several times until you exit
master mode.
Press [2] to enter user settings, then press [2]
again to enter one-time PIN code registration.
2 2
Unlock with any registered
identity information
Unlock with any two of PIN
code, card and ngerprint
◆User Number
You can delete a single user information by its user
number without having to delete everything.
◆You can record the user information in the following table for future query.
Master
PIN code
One-time
user PIN
code
Visitor
PIN
code
User
number
00-99
User PIN
code
User
number
00-09
Fingerprint Card
reader
# key
1.Press [*] key to return to the previous menu.
2. The default master PIN code is 12345678.
Attention
Modify master PIN code
Enter a user PIN code of 6 to 12 digits
and press [#] to conrm. Then re-enter
it and press [#] to conrm. After hearing
a voice prompt of “Succeeded”, press
[*] several times until you exit master
mode.
Register a one-time user PIN code
Press [#], enter master PIN code and
press [#] to conrm.