Philips HMP7001 - Update software; Update software through the Internet; Update software through USB

31
11 Update software
Before you update the software of this player, check the current software version:
1 Press .
2 Select [Setup] >[MISC] > [Version Info.], and press OK.
Update software through the Internet
1
Connect the player to the Internet (see "Set up a network").
2 Press , and select [Setup].
3 Select [MISC] > [Online upgrade].
» If an upgrade media is detected, you are prompted to start the update.
4 Follow the instructions on the TV screen to update the software.
» When the update is complete, this player automatically turns off and on again.
Update software through USB
Note
•
Do not turn off the power or remove the USB storage device when the software update is in progress because you might
damage this player.
1 Check the latest software version on www.philips.com/support.
• Search for your model and click on "Software and drivers".
2 Download the software to the root directory of a USB storage device.
3 Connect the USB storage device to the (USB) connector on this player.
4 Press .
5 Select [Setup] > [MISC]> [USB upgrade].
» If an upgrade media is detected, you are prompted to start the update.
6 Follow the instructions on the TV screen to update the software.
» When the update is complete, this player automatically turns off and on again.
EN