Philips HMP7001 - Specification

33EN
13 Specification
Note
•
Specication and design are subject to change without notice.
File
• Video: MPEG 1/2/4(MPEG 4 Part 2), H.264, VC-1, H.263, VP6(640 x 480), DivX Plus HD, DivX
3/4/5/6, Xvid, WMV (V9), AVI, TS, M2TS, TP, TRP, ISO, VOB, DAT, MP4, MPG, MOV (MPEG 4,
H.264),ASF, FLV (640 x 480), MKV, M4V
• Audio: Dolby digital, AAC, RA, OGG, MKA, MP3, WAV, APE, FLAC, DTS, LPCM, PCM, WMA
(V9),IMA/MS ADPCM, WMA pro
• Picture: .JPEG, JPG, PNG, TIFF, GIF (unanimated GIF), BMP, TIF, M-JPEG, HD-JPEG
USB storage device
• Compatibility: Hi-Speed USB (2.0)
Subtitle support
• .srt, sub, smi, .ssa, .ass, .txt, .psb, .idx+ sub
SD card
• Compatibility: SDHC 2.0 (up to 32 GB)
Video
• Signal system: PAL /NTSC
• Composite video output: 1 Vpp ~ 75 ohm
• HDMI output: 480i, 480p, 576i, 576p, 720p, 1080i, 1080p, 1080p24
Audio
• Analog stereo output
• Signal to noise ratio (1 kHz): > 90 dB (A-weighted)
• Dynamic Range (1 kHz): > 80 dB (A-weighted)
• Frequency response: +/-0.2 dB
• Digital output: Optical
Main Unit
• Dimensions (L x W x H): 178 x 57 5 x 91 mm
• Net Weight: 0.34 Kg
• Input: 240V~ 50Hz, 10W
Power
• Power consumption: < 10 W
• Power consumption in standby mode: < 0.5 W
Operating Temperature & Humidity
• 0°C to 40°C, 5% to 90% Humidity for all climates.
Storage Temperature & Humidity
• -40 °C to 70 °C, 5% to 95%
USBspecication
• USB drive current: DC 5V
, 500 mA