Philips HomeRun Aqua 7000 Series - Carpet boost; Using your robot; Preparing for a cleaning run

18
English
Setting Description
Carpet boost Turn the carpet boost on or off. The robot automatically increases the suction power
when it has driven onto a carpet or rug. It is recommended to enable this setting.
However, you can disable it for rooms where no disturbance is wanted.
Using your robot
Preparing for a cleaning run
Before you start the robot on its cleaning run:
MAX
60 °C
-
Pre-wet the mop for optimal results.
2
1
-
Attach the washable mop pad to the mop pad holder.
IMPORTANT: The mop pad holder cannot be removed and when using the
robot, the washable mop pad must always be attached to the mop pad
holder, even if you use the robot without mopping. This is to prevent damage
to the floor and the mop holder during use.
-
Remove all cables, wires and cords from the floor to prevent the robot from
getting entangled in them.