Philips HomeRun Aqua 7000 Series - Start your first cleaning program via the app; Stop; Using the robot without the app

19
English
-
Open all in-house doors.
Start your first cleaning program via the app (see H.)
Start
1 Open the app.
2 Select the cleaning program: Regular cleaning or Custom cleaning.
3 Press the 'start' icon.
Note: If the battery level is too low, cleaning cannot start. Wait until the robot
is sufficiently charged before you start a cleaning run.
Stop
1 Press the Pause icon in the app. The robot stops.
2 Press the Start icon again. The robot continues.
3 Press the Home & charge icon. The robot goes back to the station.
Using the robot without the app
Note: For an optimal experience, we recommend using the app.
Without the app, you can use the two buttons on the robot to operate it:
-
On/off button
-
Long press (3s) to turn the robot on and off.
-
Short press to start cleaning or to pause cleaning. Press again to resume
cleaning.
-
Home button
-
Short press (when the robot is not cleaning): the robot will find the station
and charge.
-
Short press while cleaning: the robot will stop cleaning. Short press again:
the robot returns to the station to charge.