EasyManua.ls Logo

Philips Saeco Moltio User Manual

Philips Saeco Moltio
66 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
Page #1 background imageLoading...
Page #1 background image
All parts of this document are the property of Saeco International Group.
All rights reserved. is document and all the information herein is provided without liability deriving from any errors or omissions. Furthermore, no part may be reproduced, used or
collected, except where express authorisation has been provided in writing or through a contractual agreement.
Published by Saeco International Group
Subject to modication EN 4219 400 00021
Service
Coee Machine
Moltio
2013-June-20
Service Manual
Rev. 04 MAY 2016
General Information
Description Value
Housing material Thermoplastic type
Size (w x h x d) 256 x 350 x 470 mm (data may vary depending on the model)
Weight 8,5 kg
Power cord length 800 - 1200 mm
Control panel Front type
Cup size Up to 152 mm
Water tank 1.9 litres - Removable type
Coffee bean hopper capacity Anima OTC AMF CMF 300 g
Coffee grounds drawer capacity 14
Pump pressure 15 bar
Boiler Stainless steel boiler
Safety devices Thermal fuse
Energy saving mode < 1 Wh
Nominal voltage - Power rating - Power supply Read the data plate placed inside the service door
Question and Answer IconNeed help?

Do you have a question about the Philips Saeco Moltio and is the answer not in the manual?

Philips Saeco Moltio Specifications

General IconGeneral
Pump Pressure15 bar
Removable Brewing UnitYes
Removable Water TankYes
Adjustable Coffee StrengthYes
Adjustable Coffee VolumeYes
Adjustable Grinder SettingsYes
Hot Water DispenserYes
Adjustable Coffee TemperatureYes
Adjustable Milk FrothYes
ProgrammableYes
Automatic Shut-offYes
Milk FrotherYes
ColorBlack

Summary

CHAPTER 1 INTRODUCTION

1.1 Documentation Required

Details documentation needed for coffee machine repair procedures.

1.2 Tools and Equipment Required

Lists necessary tools and equipment for coffee machine servicing.

1.3 Material

Specifies materials like thermal paste, descaler, and grease for maintenance.

1.4 Safety Warnings

Provides crucial safety instructions for appliance repair and handling.

1.5 Service Policy

Outlines the service policy for coffee machine component replacement and repair.

1.6.1 External Machine Parts

Identifies and illustrates external components of the coffee machine.

1.6.2 Internal Machine Parts

Identifies and illustrates internal components of the coffee machine.

CHAPTER 2 TECHNICAL SPECIFICATIONS

2.1. Technical Specifications

Lists the detailed technical specifications of the coffee machine.

2.2.1. Specification for the measurement of the coffee products temperature.

Details procedures and limits for measuring coffee product temperature.

2.2.2. Specification for the measurement of the Milk products temperature.

Details procedures and limits for measuring milk product temperature.

2.3. Machine Parameters and Performance

Details machine parameters, performance, and descaling cycle frequency.

CHAPTER 3 BRIEF INSTRUCTIONS

3.1.1. Customer menu in the Moltio one Touch Milk Carafe.

Explains the customer menu and display signals for the One Touch Milk Carafe model.

3.1.2. Customer menu in the Automatic and Classic.

Explains customer menu and display signals for Automatic and Classic models.

3.2. Operation, Cleaning and Maintenance

Guides on operating, cleaning, and maintaining the coffee machine.

CHAPTER 4 OPERATING LOGIC

4.1.1. Water Circuit in Moltio One Touch Milk Carafe

Illustrates the water circuit for the One Touch Milk Carafe model.

4.1.2. Water Circuit in Moltio Classic and Automatic

Illustrates the water circuit for Classic and Automatic models.

4.1.2. Milk Carafe

Explains the operation and components of the milk carafe.

4.2. Coffee Cycle

Details the sequence of operations during the coffee brewing cycle.

4.3. Single Microswitch

Explains the function and operation of the single microswitch.

4.4. Temperature Sensor (Adjustment)

Describes the temperature sensor and its adjustment values.

4.5. Coffee Grinder

Details the coffee grinder's mechanism and operation.

4.6. Low Bean Level Detection, Dose Quantity Adjustment, Coffee Grinder Blocked

Explains bean level detection, dose adjustment, and grinder blockage detection.

4.7. Dose Self-Learning (SAS)

Explains the automatic dose adjustment system based on learned parameters.

4.8. Water Level Detection (Water Tank)

Describes the water level detection system and its related messages.

4.9. Descaling Request

Explains descaling requests and water filter replacement notifications.

4.10. Water Filter

Details the function, life span, and descaling performance of the water filter.

CHAPTER 5 SERVICE MODE

5.1.1. Test Mode in Moltio One Touch Milk Carafe

Guides on entering and navigating the test mode for the Milk Carafe model.

5.1.2. Test Mode in Moltio Automatic and Classic

Guides on entering and navigating the test mode for Automatic and Classic models.

5.2. Error Codes

Lists and describes various error codes for the coffee machine.

5.3. Saeco Service Center - Quick Start Guide

Information on the Saeco Service Center tool for reprogramming and diagnostics.

CHAPTER 6 SERVICE AND MAINTENANCE

6.1. Repair Flow

Provides a step-by-step guide for the coffee machine repair process.

CHAPTER 7 DISASSEMBLY

7.1. Outer Shell

Instructions for disassembling the outer shell of the coffee machine.

7.2. Coffee Grinder

Steps for disassembling and removing the coffee grinder.

7.3. Grinder Blades

Instructions for removing and handling the grinder blades.

7.4. Coffee Grinder Adjustment

Details on user and service center adjustments for the coffee grinder.

7.5. Solenoid Valve

Steps for disassembling and removing the solenoid valve.

7.6. Pin Boiler

Instructions for removing the boiler pin.

7.7. Steam Pipe

Steps for disassembling the steam pipe and related components.

7.8. Dispenser

Instructions for disassembling the coffee dispenser unit.

7.9. Gear Motor

Steps for disassembling and removing the gear motor assembly.

7.10. Pump

Instructions for removing the water pump.

7.11. Flow-meter

Steps for removing the flow meter.

7.12. Boiler

Instructions for disassembling and removing the boiler.

7.13. Flow Selector Faucet

Steps for disassembling the flow selector faucet.

7.14. CPU Board

Instructions for removing the CPU board.

7.15. Programming Access for SSC (Saeco Service Center)

Details on accessing programming functions for the Saeco Service Center.

7.16. KYB Interface and Display

Steps for disassembling the KYB interface and display.

7.17. Fitting and Removing Oetiker Clamps

Guides on fitting and removing Oetiker clamps used in connections.

CHAPTER 8 NOTES

CHAPTER 9 WATER CIRCUIT DIAGRAM

Moltio Automatic and Classic

Water circuit diagram for Moltio Automatic and Classic models.

Moltio One Touch Milk Carafe

Water circuit diagram for Moltio One Touch Milk Carafe model.

CHAPTER 10 ELECTRICAL DIAGRAM

Moltio One Touch Milk Carafe, Automatic and Classic

Electrical diagram for Moltio One Touch Milk Carafe, Automatic, and Classic models.

Related product manuals