Philips Saeco Moltio - 7.2. Coffee Grinder; 7.3. Grinder Blades

MOLTIO 07 DISASSEMBLY
2/11
7.2. Coffee grinder
Raise the coffee grinder and remove the connections.
When reassembling the coffee grinder,
make sure the spring is repositioned
correctly (see photo).
7.3. Grinder blades
To extract the top support of the appliance, press
on the grinding adjustment spindle (A) and turn the
support anticlockwise until it unhooks.
A
B
Turn the grinder blades anti-
clockwise out of the support.
Turn the grinder blades clockwise out of
the support. The bayonet connections
can be accessed from the rear.
Unscrew the screws shown.
Remove the support the reed
sensor
Remove the support the
coffee container.