Philips Saeco Moltio - 7.10. Pump; 7.11. Flow-meter; 7.12. Boiler

MOLTIO 07 DISASSEMBLY
8/11
7.10. Pump
Disconnect the water circuit,
electrical and remove the pump
from the bottom support
Unscrew the pump from the safety
valve and slip off the pump off the
upper support
7.11. Flow-meter
Lift the ow meter out of the casing
assembly and remove the electrical
and water circuit connections.
Unscrew the screw shown
and remove the electrical and
water circuit connections.
Remove the cover of the boiler by pressing the two sides with the help of a screwdriver
7.12. Boiler