Philips SpeechMike - Parameter Scanning; Linear Code Type Security Level; Linear Security Level 1; Linear Security Level 2

10 Advanced Scanner Configuration Guide
Revision: 2.0 , technical changes excepted
Parameter Scanning
To disable decoding of parameter bar codes, scan the bar code below. The Set Defaults parameter bar code can
still be decoded. To enable decoding of parameter bar codes, scan
*
Enable Parameter Scanning or Set Factory
Defaults.
.
*Enable Parameter Scanning
Disable Parameter Scanning
Linear Code Type Security Level
The SpeechMike Barcode offers four levels of decode security for linear code types (e.g. Code 39, Interleaved 2 of
5). Select higher security levels for decreasing levels of bar code quality. As security levels increase, the scanner
’
s
aggressiveness decreases.
Select the security level appropriate for your bar code quality.
Linear Security Level 1
The following code types must be successfully read twice before being decoded:
Code Type Length
Codabar All
MSI 4 or less
D 2 of 5 8 or less
I 2 of 5 8 or less
*Linear Security Level 1
Linear Security Level 2
All code types must be successfully read twice before being decoded.
Linear Security Level 2