50 Advanced Scanner Configuration Guide
Revision: 2.0 , technical changes excepted
Intercharacter Delay
The intercharacter delay gives the host system time to service its receiver and perform other tasks between
characters. Select the intercharacter delay option matching host requirements. The delay period can range from no
delay to 99 msec in 1 msec increments. After scanning the bar code below, scan two bar codes beginning on page 51
to set the desired time-out. To change the selection or cancel an incorrect entry, scan the
Cancel bar code on page
51.
Intercharacter Delay
(Default: 0 sec.)
To Next Page
Loading...
