Advanced Scanner Configuration Guide 11
Revision: 2.0 , technical changes excepted
Linear Security Level 3
Code types other than the following must be successfully read twice before being decoded. The following codes
must be read three times:
Code Type Length
MSI 4 or less
D 2 of 5 8 or less
I 2 of 5 8 or less
Linear Security Level 3
Linear Security Level 4
All code types must be successfully read three times before being decoded.
Linear Security Level 4
Bi-directional Redundancy
This parameter is only valid when a Linear Code Type Security Level is enabled. When this parameter is enabled,
a bar code must be successfully scanned in both directions (forward and reverse) before being decoded.
Enable Bi-directional Redundancy
*Disable Bi-directional Redundancy
To Next Page
Loading...
